Out of stock

TAC System Climax Quartz Coating

Product Description: Climax is the TAC System Professional choice for long term durable protection, ultra high solids, and extreme gloss. Climax is a two part coating, providing maximum protection via the base layer and optimal surface properties with the top coat.

Product Benefits: Highest Gloss. Extreme Slickness. Outstanding UV & Chemical Resistance. Super high solids coating coating. Great self cleaning properties due to super hydrophobic surface properties.

Durability/Specs: 5yrs. for one layer (Application includes one layer for base coat, one layer for top coat) The base layer is applied with 0.6um thickness.


(1) 50ml bottle Base Coat

(1) 50ml bottle Top Coat

(6) MF suede applicators

(1) Large MF suede towel

Warnings: Always wear respirator & gloves during application. Ensure application area is free of loose contaminatination.

This is a professional coating.  To purchase this product, please email


Out of stock


Directions: (In a well lit, temperature controlled 50°F-85°F (10°C-30°C), & contamination free environment)

Base Coat: Frequent changing of suede & leveling towels is required.

Recommended Application: Area ~ 1/2 Hood Size area – then change MF suede. After even application of base coat across the surface, immediately use new towel and remove the coating from the panel.

– Wait 1hr between application of base and top coat.

Top Coat: Requires less applicators than base coat and is a little more time forgiving than the base coat. Recommended Application Area ~ 3 panels, then switch suede. Coating removal towels are changed at the same frequency of the MF suede applicators.After even application of top coat across the surface, immediately use new towel and remove the coating from the panel.

Post Application Instructions:

– Wait 1hr before topper can be added.

– 24hrs before any water exposure. Unless IR lamps used under 165°F are used 5-8 min per panel.

– Wait 7 days before first wash.

Tips / Alternate Uses: High spots are visible for 20-30min. If high spots are found within an hour of wipe off, they can be reactivated and removed with the base coat or top coat (on a new MF applicator) depending on which coating was applied last..

For Optimal Results: First thoroughly wash vehicle with Mystic Bubble then remove all embedded iron deposits from vehicle paint pores and surfaces using Iron Zero. Next, polish vehicle surfaces to highest level. After polishing, use Oil Zero to remove all polish oils from surfaces to ensure optimal bonding and durability for the coating application.

Max Efficiency:

1] Apply Base Coat then cure with IR lamps at 165°F about 18-24” from the painted surface for 5-8 min per panel.

2] Apply Top Coat then also cure with IR lamp.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.