Iron Zero Paste

Iron Zero Paste


In stock

TAC System Iron Zero Paste

Product Description: Safe and simple to use, Iron Zero Paste removes iron deposits that are embedded within the pores of paint, otherwise thought to be untouchable. Our paste prevents the spread of iron-related damage and cleanses the painted surfaces from other environmental contaminants.

Common Uses: Decontamination of exterior vehicle surfaces.

Warnings: Do not use on fabric convertible tops. Do not allow Iron Zero to dry on surfaces. Avoid using in direct sunlight. Use ONLY on Cool wheels. If comes into contact with skin, rinse well with water. Always wear respirator & gloves during use. If it comes in contact with eyes, rinse immediately and seek medical care.


Iron Zero Paste is a concentrated form of TAC System Iron Zero. It has the same acid-free and PH-balanced benefits which eliminate contaminants from vehicle exterior surfaces, including stubborn wheel deposits.

Directions: Shake bottle well. Apply on cool panels out of direct sunlight.

1] Clean vehicle of all loose contamination.

2] After washing, rinse vehicle and while wet, evenly spread Iron Zero Paste over area to be decontaminated.

3] Allow the product to take effect and dwell for 5 minutes. It will turn purple when reacting with iron.

4] After 5 minutes, gently agitate the surface with appropriate wash media to remove contaminants.

Professional Tips / Alternate Uses: Iron Zero Paste can be mixed to a stronger solution than Iron Zero, therefore it can be used to tackle the heaviest deposits on severely neglected wheels. When mixing at strong dilutions, only use under strict supervision and rinse thoroughly.

Additional information

Weight N/A
Dimensions N/A
Product Sizes

250ml, 500ml


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…