Top Coat 2.0 Most advanced surface protection

Top Coat 2.0 is an further upgrade to Top Coat 1.0. Outcoming result is even more mouth dropping, absolutely easy application on all exterior vehicle surfaces.  Top Coat is compatible with any TACSYSTEM Quartz coatings, works impressively well as a standalone coating too. Superior gloss with insane hydrophobic properties to paint, allowing for extreme ease of vehicle maintenance.

Durability/Product Specs: 1 year – 1 layer.

Common Uses: Stand alone LSP for painted surfaces, or as a topper to Tacsystem coatings after full curing.

Warnings: Always wear respirator & gloves. Ensure application area is free of loose contamination.

Directions: Applicator Limit = Hood size section. Max Dwell time 3 minutes, wipe off 1-3 minutes. (suggested application: 2 panels at a time)

1] Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.

2] With a dedicated MF suede or MF applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well… a little goes a long ways.

3] Once applied allow Top Coat 2.0 to dwell for 1-3 minutes, then using a clean soft MF towel, buff the surface until all excess product is removed.

Post Application Instructions: For Best Result, Top Coat 2.0 requires 24 hours of cure time before water exposure.

Tips / Alternate Uses:  Top Coat 2.0 can also be topped off with Quartz Max.